Morrison sits where the plains meet the mountains, and that setting is beautiful right up until it starts working against your home’s exterior. Homes here take intense high-altitude sun, wind funneling out of the canyons, some of the most frequent hail in the country, and real wildfire exposure along the wildland-urban interface. Those conditions wear siding down faster than most homeowners expect, and west of town, the material you choose becomes a safety decision as much as an aesthetic one. GS Exterior Experts installs and replaces siding systems designed to handle it all.
We handle full siding installation and replacement for Morrison homeowners, and everything that goes with a proper exterior: trim, soffit, fascia, moisture barriers, flashing, and insulation upgrades. Whether you own a 1970s ranch on a mature lot near Bear Creek Lake Park or a custom home on canyon acreage, the goal is the same: an exterior that seals out weather and holds up to the conditions specific to this stretch of the foothills.
When siding has reached the end of its life, we strip it down, inspect the sheathing underneath, correct any moisture or structural issues we find, and install a new system rated for what Morrison actually throws at a home. You get a straight assessment of what’s worth saving and what isn’t.
These are replaced alongside your siding so the whole envelope is finished and sealed as one system. On foothill homes, well-detailed soffits and eaves also matter for ember resistance, not just for looks.
Before any new cladding goes up, we check what’s behind the old siding. Morrison’s freeze-thaw swings and wind-driven precipitation punish a compromised weather barrier, so if the barrier or insulation is failing, we address it first.
Three things shape almost every siding decision we make out here, and none of them show up on a template.
At roughly 5,800 feet and up, Morrison takes more UV than the lower metro, since intensity rises around 2% for every 1,000 feet of elevation. That accelerates fading and finish breakdown on materials that would last longer at sea level. Factory-baked finishes and UV-stable products earn their keep here.
Jefferson County sits squarely in “Hail Alley” and consistently ranks among the top counties in Colorado for hail insurance claims. Storms dropping one- to two-inch stones are a seasonal reality, not a rare event, and they punish brittle or thin cladding. Many carriers offer a premium discount for impact-rated roofing, so if you are replacing both, the upgrade often costs less over time than it appears at quote stage.
The Morrison area is a textbook wildland-urban interface, with fast-moving grassland fire and hot-burning oak-and-conifer stands often within a few hundred feet of each other. Chinook winds can push a grass fire faster than anyone can react, so for homes in the hogbacks, up the canyon, and in the unincorporated foothills, noncombustible cladding isn’t a luxury. It’s increasingly what insurers and the county code expect.
For most homes in and around Morrison, fiber cement is the practical answer to all three problems at once. James Hardie and comparable fiber-cement products hold their finish at altitude, resist impact better than vinyl or aluminum, stay dimensionally stable through freeze-thaw cycles, and, critically for the foothills, are noncombustible (verified to ASTM E136) with a Class A flame-spread rating. Hardie backs the substrate with a 30-year non-prorated warranty.
That combination is why we lean toward fiber cement on nearly every foothill project. It won’t add fuel to a fire, and it does not ignite from the windborne embers that account for most wildfire home losses. Note that the fire classification covers the fiber cement itself, not paint applied over it. If your home still has original wood, Masonite, or hardboard, those materials absorb water, delaminate, and fail at the fastener line, and fiber cement removes that failure mode entirely.
We’re not a single-product shop, though. Depending on your home’s style, budget, and location, we also install LP SmartSide engineered wood, Nichiha fiber cement panels for a modern look, stucco systems, stone and brick veneer, and EverLog concrete log siding, a noncombustible option that gives canyon and mountain homes the log-cabin look without the fire risk. We’ll walk you through the trade-offs rather than force a single product on every house.
Wildfire has changed the rules for exterior work in the foothills. Jefferson County adopted its Wildfire Resiliency Code in March 2026, and it took effect for applicable permits on July 1, 2026. It applies to properties in unincorporated Jeffco that fall inside the mapped Wildland-Urban Interface, which covers a large share of the canyon, hogback, and foothill homes around Morrison. For qualifying new construction and many exterior renovations, that means noncombustible or ignition-resistant cladding, Class A roofing, and ember-resistant venting.
We have been specifying noncombustible cladding on foothill projects since well before the code required it, so if your project falls under it, compliance is built into how we scope rather than added at the end. If you want to understand how it affects your specific address, our fire-resilient home guide breaks down the material requirements, and you can download the full Colorado Wildfire Resiliency Code e-book for the details.
We come out, walk the exterior with you, and tell you what we actually see. We provide an honest assessment and recommend complete replacement only when the property and project scope warrant it, with no inflated scope and no pressure.
We review material options, colors, fire and impact ratings, and any related upgrades before scheduling anything. You’ll have a clear picture of cost, product fit, and timeline up front. Our design tools help you see options for your own home.
We prep the surface, install the weather barrier, correctly install every flashing and transition detail, and finish every edge and opening the way they should be. On foothill homes, the details nobody sees, like the ember-resistant transitions and the sealed penetrations, matter as much as the panels everyone does see.
We have been doing exterior work across the Front Range and its mountain communities since 1999, long enough to know that shortcuts always surface later, usually right after the warranty runs out. What Morrison homeowners get from us:
James Hardie Elite Preferred Contractor, and a Team Dave Logan screened contractor
Crews who understand foothill conditions, not just suburban tract homes
Honest recommendations on when complete replacement is warranted
Noncombustible options across fiber cement, steel, and concrete log siding
Support documenting hail and storm damage for insurance claims
One team for siding, roofing, windows, and decks when a project spans more than one system
If you’re looking for a siding contractor in Morrison, CO, call us at (720) 683-6288 or request a free estimate, and we’ll come take an honest look at what your home needs.
Yes. We work throughout Morrison, Bear Creek Canyon, the hogback neighborhoods, and the surrounding unincorporated foothill areas of Jefferson County, as well as nearby communities like Golden, Evergreen, and Conifer. Morrison sits within our full Denver-metro service area, which covers the foothills and the west metro.
For most homes out here, fiber cement is the practical choice. It handles high-altitude UV, hail, and freeze-thaw better than vinyl, holds its finish longer than wood, and importantly for foothill and canyon properties, it’s noncombustible, which matters under Jefferson County’s Wildfire Resiliency Code. We’ll walk you through the options based on your home’s location and style.
No. The code applies to qualifying new construction and certain exterior renovation permits in the mapped Wildland-Urban Interface; it doesn’t force existing homes to retrofit on a deadline. But if you’re already replacing siding on a foothill property, it’s the natural moment to upgrade to noncombustible materials, and we can confirm how the code applies to your address.
It comes down to how far the damage has spread and whether moisture has reached the sheathing. Failure across multiple elevations, soft spots behind the surface, or siding well past its expected life usually points to replacement rather than repair. We’ll give you a straight answer once we see it.
Yes. Jefferson County takes a lot of hail, and storm work is a meaningful part of what we do here. We document our findings during our assessment to support your insurance claim, and we’re familiar with the process.
Yes. We coordinate permits for replacing or installing new siding as part of your project. Full siding replacements typically require one, and in WUI areas, there may be additional wildfire-code review. We handle that so you don’t have to navigate it yourself.
